Integrated desiccant dehumidification and vapor compression cooling
technologies, utilizing SSCR rotors.
The most efficient way to produce the driest air. You won't find
better performance.
DrySorb units are available as either EconoSorb™ or CoolSorb™
models. All units incorporate the Seibu Giken SSCR Ultra rotor and
use the heat of rejection from the condenser coil as the reactivation
energy. This greatly reduces the need for electric power to operate
the dehumidifier while producing lower dew point air than typical
vapor compression unitary products.
EconoSorb™ units utilize an independent air stream for the
desiccant reactivation air. CoolSorb™ units use a single air
stream for both reactivation and "process" air and can
be used in difficult applications where outside air is not available
for reactivation.
 Designed
for commercial building applications, especially for the pre-treatment
of ventilation, these units deliver drier air then either enthalpy
heat exchangers or commercially available unitary packages. With
built-in cooling, treated air is delivered to the space, or return
air plenum, at a much lower enthalpy value then the return air.
The result? DrySorb products can effectively treat ventilation,
or a portion of return air, to control the humidity within the building,
and eliminate the outside air load on the building systems.
Applying a DrySorb unit to treat the ventilation air does not require
any modification to the existing air-conditioning equipment for
existing buildings. Including DrySorb units in new construction
can result in more efficient performance of air-conditioning systems
as the latent load of the ventilation air and the internal space
can be treated by dehumidifier. This will result in greater humidity
control and improved indoor air quality. DrySorb for dry buildings™
Units are available in the range of 750 to 25,000 cfm.
Applications:
Offices, Health care centers, Hotels, Atriums, Libraries, Museums,
Archives, Schools/Universities, Laboratories, Theaters, Public facilities,
Packaging, Storage, Warehousing, Water damage restoration.
Features:
- Integrated vapor-compression and desiccant technologies.
- Seibu Giken SSCR Ultra rotor inside! The most advanced desiccant
rotor available. Desiccant is made "in-the-flute" encapsulating
the ceramic fiber substate. Rotors are both washable and non-shedding.
- Quiet running scroll type compressor.
- Environmentally friendly, non-ozone depleting refrigerant.
- Evaporator coil is frost free by design.
- Built-in energy conservation
- EconoSorb:
Energy consumption is 25% of a standard desiccant dehumidifier
and 50% of a mechanical unit rated at 68 F and 60% RH.
Available in standard and tropical designs.
Capacity range: 500 to 20,000 scfm. 20 to over 400 lbs/hr of water
removal
- CoolSorb:
Energy consumption is 33% of a standard desiccant dehumidifier
and 60% of a mechanical unit rated at 68 F and 60% RH, requiring
only one air stream.
Capacity range: 800 to 12,000 scfm. 8 to over 130 lbs/hr of water
removal
Construction:
2-Inch thick insulated double wall panels secured to aluminum extruded
profile frame.
Controls:
Automatic built-in refrigeration circuit controls and air management
system.
|
